MiSTer Pi VGA to RGB SCART

Description

Specification:

• Connector A: 15 Pin D-sub (VGA Video input)
• Connector B: EuroSCART (CRT Video output)
• Connector C: Male 3.5mm stereo jack (Audio input)
• Cable Length: 1,6mt (default)
• Color: Black

• VGA pin 13 connects to SCART pin 20 (470 Ω resistor on the sync line)
• VGA pin 14 connects to SCART pin 16 directly (1,6v or less, no attenuation required)
• Our cable does not use VGA PIN 9, works with MiSTer I/O set in 3.3v

In MiSTer Pi FPGA, to configure 15 kHz RGB output, you need to change the settings in the mister.ini file. To avoid any issue we recommend that you back up first your configuration file (mister.ini) and put a new one with a new configuration.

> MiSTer Pi FPGA – MiSTer.ini config:

• forced_scandoubler = 0
• composite_sync = 1
• vga_scaler = 0
• direct_video = 0 *

* this option must be = 1 (enabled) just if you use HDMI to VGA DAC dongles with direct video. If set without DAC it may shows incorrect colors.

Notes: Scandoubler config setting in OSD menu (F12) OFF in all cores.